Clear Acrylic Floor Vase Flower Stand With Mirror Base, Pedestal Columns

[About]

• Quantity: 1 Set Flower Stand
• Material: Acrylic
• Color: Clear
• Total Width: 10″
• Top/Bottom Base Size: 10″L x 10″W x 4mm Thick
• Assembly Required: Yes
• Item includes:
• 8 Poles
• 2 Bases
• Total 12 Screws
• 8 Screws for Top & Bottom
• Diameter: 0.25″ | 3mm
• Screw Length: 3.5″
• 4 Screws for Connecting the Pole
• Diameter: 0.1″
• Screw Length: 0.5″
• 1 Screw Driver
• Accessory Bag ( for screws & screw driver)
• Top Base is Clear (both sides) and Bottom Base is Mirrored (one side)
• Need to remove protective plastic film before use

[Information]

Additional Information:

• 40” Flower Stand
• Total Height: 40″
• Inner Height: 39″
• Individual Pole Size: 20″
• 48” Flower Stand
• Total Height: 48″
• Inner Height: 47″
• Individual Pole Size: 24″
• Max Weight Capacity: 10-15 lbs
• Length of Space between Poles: 7.75″
• Total Leg Inserts: 8pcs
• Base Leg Insert Size: 2″L x 0.75″ (Diameter)
• Each pole end has a hole for screw insert
• Each Base has (4x) glued-on Leg Inserts, one for every corner
• Comes Disassembled
• No Instructions Included. Easy to Assemble.
• How to Care: Cleaning acrylic pillar stand should consist of wipe-cleaning with a soft rag or cloth while using a non-abrasive cleaner. For light stains or debris, you can also use canned air or clean water with a microfiber cloth. You should never use window cleaners, cleaning solvents with ammonia, or other chemical sprays as they can scratch or damage your acrylic products.
• Uses: Home decor, Party decoration, Event centerpieces, Dining table centerpieces, Living room decor.

Important Note:

• Leg Inserts are designed to protect the Top and Bottom Panels during transit. They need to be removed prior to installation.
• The Hole Tracing on each end poles guide the screw to go into the pole’s ends. To avoid breakage, make sure to not over-screw. A good amount of tightness should be good to avoid over-screwing.